Automotive Glass Replacement OEM Solutions

DINITROL crash test approved direct glazing products are applied during automotive vehicle production and throughout the aftermarket.
The DINITROL vehicle glass replacement system provides the perfect solution throughout the automotive windshield fitting aftermarket due to the DINITROL 9100 high modulus low conductive one component polyurethane adhesive product providing a 30-minute safe drive away time.

Automotive Glass Replacement (AGR)

Watch the video we have specialist direct glazing glass replacement and installation products incorporating High Modulus, Low Conductive, Primerless to Glass, High Viscosity and Low Viscosity characteristics. The products are primarily used throughout the aftermarket glass replacement industry within the Automotive, Bus, Truck, Rail, Industrial Caravan, and Motorhome sectors.

Get in touch
OEM approved DINITROL glass replacement product application information
Click on the Glass Replacement diagram below to download a full diagram also containing the full product information available by clicking on the Toggles underneath.
2. Pretreatment
Activating & Priming:
One-Step Priming:
Activating:
Activating PUR - RIM

DINITROL 9000 provides a 1 hour Safe Drive Away time

Our OEM approved cold applied high modulus and non-conductive DINITROL 9000 is FMVSS 212/208 approved and provides a 1-hour safe drive away. The unique adhesive system is used worldwide throughout the Automotive Glass Replacement industry sector.

Get in touch

Watch our glass replacement products perform in the crash test videos in accordance with FMVSS 212

DINITROL 9100 Front View
Crash Test video with the polyurethane adhesive DINITROL 9100. This test was made by TÜV acc. FMVSS 212 and 30 minutes after the installation of the windshield.
DINITROL 9100 Side View
Crash Test video with the polyurethane adhesive DINITROL 9100. This test was made by TÜV acc. FMVSS 212 and 30 minutes after the installation of the windshield.
DINITROL 501 FC Front View
Crash Test video with the polyurethane adhesive DINITROL 9100. This test was made by TÜV acc. FMVSS 212 and 30 minutes after the installation of the windshield.
DINITROL 501 FC Side View
Crash Test video with the polyurethane adhesive DINITROL 9100. This test was made by TÜV acc. FMVSS 212 and 30 minutes after the installation of the windshield.
DINITROL 501 FC HM Front View
Crash Test video with the polyurethane adhesive DINITROL 501 FC-HM. This test was made by TÜV acc. FMVSS 212 and 60 minutes after the installation of the windshield.
DINITROL FC HM Side View
Crash Test video with the polyurethane adhesive DINITROL 501 FC-HM. This test was made by TÜV acc. FMVSS 212 and 60 minutes after the installation of the windshield.
DINITROL 9100
polyurethane adhesive  direct-glazing of automotive glasses crash test
DINITROL 9100 is a humidity-curing and one component polyurethane adhesive for the direct-glazing of automotive glasses that provides a 30-minute drive-away. The properties of the DINITROL 9100 product are the following
• 30 minutes safe drive-away time
• High modulus
• Low conductive
• Cold applycable
• Solvent and PVC free
• Fast curing
• High elasticity
• Crash test approved FMVss 208/212
• Excellent working characteristics
• Direct glazing automotive glass parts
Download Brochure
DINITROL 538 Plus 1 Step Primer
polyurethane direct-glazed automotive glass parts dinitrol adhesives product solutions
DINITROL 538 plus is a primer designed as a pretreatment in replacing polyurethane direct-glazed automotive glass parts and other substrates. The properties of the DINITROL 538 Plus product are the following:
• "one-step” glass-frit primer
• RIM and pinchweld primer
• Long life primer
• Inhibits rust in small nicks & scratches
• Compatible with DINITROL adhesives
• OEM approved
• Blocks 100% of harmful UV rays
• PAAS Re-activator primer
• Direct glazing pretreatment
• Black coloured primer
Download Brochure
DINITROL 501 FC-HM
direct-glazing of automotive glasses polyurethane adhesive dinitrol Uk crash test products OEM
DINITROL 501 FC-HM is a humidity curing and one component polyurethane adhesive for the direct-glazing of automotive glasses. The properties of the adhesive DINITROL 501 FC-HM product are the following:
• Good adhesion on paints
• Fast curing and high modulus
• Excellent working characteristics
• Very good standing properties
• Short cut-off string
• High elasticity
• Solvent and PVC free
• OEM approved
• Ageing and weather resistant
• Crash test approved FMVSS 212
Download Brochure

Find out how we can assist your business today...

The DINITROL direct glazing product range is ideal for both automotive vehicle manufacturers and for use during windscreen replacement throughout the repair aftermarket. Our direct glazing specialists can work closely with your organisation and provide training along with ongoing technical support. All DINITROL direct glazing product solutions have undergone extensive independent crash testing and gained successful accreditation.

Get in touch
polyurethane adhesive direct glazing windscreen replacement product solutions
OEM Automotive Glass Replacement Solutions 2018-03-01T17:46:06+00:00