dinitrol 443 zinc paint primer corrosion protection metal car auto repair refinish bodywork damage repair panels oem approved uk classic car
corroheat 4010 dinitrol engine preservation corrosion protection high temperature vehicle engine compartment rust prevention classic car
dinitrol penetrant lt cavity wax open surfaces cavities vehicles industrial application classic car off road 4x4 passenger car uk
Dinitrol official uk shop vehicle corrosion protection rust treatments rustproofing land rover 4x4 car chassis hgv commercial vehicle windscreen direct glazing adhesives uk dinol
FREE uk delivery dinitrol official UK website online store ecommerce buy rust proofing corrosion protection uk bonding sealing adhesives classic car oem official uk website rust prevention courier service
  • Quick-drying and elastic polyurethane sealing and bonding product. New improved product formula.

    DINITROL 410 UV (NF - New Formula) is a 1-component polyurethane sealing and bonding compound with good resistance and UV stability. The sealer is quick-drying and elastic, and can be coated with most lacquers. 2-C acrylic lacquers can be applied in a wet-on-wet process. Paints containing alcohol and alkyd resin impair hardening. New improved product formula released on sale in the UK July 2018. Colours available are: Black, White & Grey. (1 x 300ml cartridge supplied or 12 if the full box is purchased).
  • Converts the rust into a stable organic iron complex

    DINITROL RC 800 is a co-polymer latex combined with organic agents designed for application to corroded ferrous substrates. DINITROL RC 800 actively converts the rust present on the substrate into a stable organic iron complex. As the polymer dries it forms an impermeable barrier to oxygen and moisture effectively sealing out any further corrosion. DINITROL RC 800 has an extremely low order of toxicity and does not contain phosphoric acid or lead. (1 x 1 Litre container supplied or 12 if the full box is purchased)
    Please note: DINITROL RC800 is a highly technological advanced product with a complicated chemical formulation. The product only works at temperatures above 10 degrees and must be allowed to fully dry. Guidelines stipulate at standard atmospheric conditions 15 degrees and humidity of 60% the average drying time is 24 hours. Sometimes multiple coats must be applied before the corrosion is fully converted into a deep black colour providing indication that the area has been treated. (When applying multiple coats you must make sure that the earlier coating is completely dry)
  • Specifically designed for engine compartments

    The product specifically designed for engine compartments and creates a hard, transparent film that is resistant to both alkalin and acids whilst providing heat resistant up to a temperature of more than 200 degC. The adhesion and flexibility properties on rubber and plastic parts are also very good at both low and high temperatures. (1 x 1 Litre can supplied or 12 if the full box is purchased)
  • Metallic underbody treatment for vehicles

    Underbody product for treatment of vehicles during production, at import plants and in the aftermarket. When applied to a clean, dry surface, it adheres to both painted surfaces and those coated with a layer of PVC or similar material. Zinc, rubber and plastics are completely unharmed by the product. A clean and economic treatment on the line is assured by easy application and high solid content. DINITROL Metallic is also designed to be used on spare parts, machines and iron and steel structures in highly corrosive environment. DINITROL Metallic is also very suitable as a transport and storage anti-corrosive for long-term transporting or ware-housing under extreme corrosive circumstances. (1 x 500ml aerosol can supplied or 12 if the full box is purchased)
  • Extremely thixotropic road sound damping coating

    Thick corrosion preventative compound with a "rubbery" consistency which forms a very hard, elastic, wear resistant protective film with extremely good sound damping properties. The product has high thixotropy, contains low aromatic solvent that do not attack paints, plastics and rubber parts of the car. The thick layer of coating has a heavy-duty structure, which looks like orange peel and absorbs very well outside road noise resonance from vibrations of vehicle parts as well as dampening sound from stone chip and sand attacks. The product withstands heavy mechanical wear with excellent adhesion properties. DINITROL 479 is an approved alternative for wheel arches covers from plastic or felt. (1 x 1 Litre can supplied or 12 if the full box is purchased)
  • DINITROL 6030 Alusoft – 2000g Tin

    From: £24.69

    Aluminium body filler for the repair of dents in vehicle bodywork & steel constructions

    Aluminium Putty is a universally applicable 2-c filler putty with a polyester basis. The putty is especially compact and pore-free. Aluminium putty is suitable for the repair of dents in vehicle bodywork, steel constructions, to strip machine casing and to renovate cement, brickwork, etc. Dents with up to 15 mm depth can be levelled out on vertical surfaces. Given its high aluminium content, excellent corrosion protection is achieved. (1 x 2000g can supplied or 6 if the full box is purchased)
  • DINITROL Ejector Cavity Spray Gun for airmix applications. For one litre, threaded neck containers. Gun is equipped with a nozzle for external application and a flexible wand for low viscosity cavity applications.
  • Black pre-treatment primer for replacing polyurethane direct-glazed automotive glass parts

    DINITROL 530 is a primer designed as a pre-treatment in replacing polyurethane direct-glazed automotive glass parts and other substrates. DINITROL 530 is a solvent containing, physically and chemically drying black primer which promotes the adhesion between the glass (in combination with the activator DINITROL 520) and paint and the direct glazing adhesive and acts as a UV protection. DINITROL 530 combines the following functions: Pre-treatment on glass and paint, Inhibits rust in small nicks and scratches, Compatible with all DINOL adhesive systems. (1 x 30ml bottle supplied or 25 x 30ml bottles if the full box is purchased or 1 x 100ml bottle or box of 12 x 100ml bottles)
  • Compatible application trigger aerosol attachment

    The application trigger aerosol attachment is compatible with DINITROL aerosol products and perfect for applying vehicle underbody coatings when rustproofing. The equipment tool attachment provides greater control when spraying the product during treatment application. 1 x Plastic compatible application trigger aerosol attachment supplied.
  • Stone chipping & corrosion protection coating

    Black coloured long-term protection product against corrosion and stone chipping with a synthetic resin/plastic basis. After drying, the materials are resistant to carbon hydride-based cold cleaning agents, surfactant-based acid and alkaline high pressure cleaners, salt water and road salt. (1 x 500ml aerosol can supplied or 12 if the full box is purchased)
  • Glass activator & adhesion promoter

    The transparent glass activator DINITROL 520 is a solvent based product that provides great adhesion when used in combination with the DINOL glass primer when direct glazing in the automotive industry. In combination with the multi primer DINITROL 550, the activator DINITROL 520 improves the adhesion on many metal and plastic surfaces. However we recommend you test the actual substrates and conditions to ensure excellent adhesion and material compatibility. 30ml bottle shown. (1 x 30ml bottle supplied or 25 if the full box is purchased)
  • Fast-drying auto-body protection agent

    DINITROL 447 Protect Super is a fast-drying, rubber and resin based auto-body protection agent. Clearly higher rust protection is achieved through zinc additives. Zinc ions also prevent or delay rust formation in areas where the protective film is damaged. DINITROL 447 Protect Super contains no aggressive solvents such as chlorinated hydrocarbons (CFC/CHC), esters and ketones. (1 x 500ml aerosol can supplied or 12 if the full box is purchased).
  • Direct glazing adhesive

    The humidity-curing and one component polyurethane product is ideal for the direct-glazing of automotive glass. The black coloured adhesive provides good adhesion on paints and is fast curing. The product has a high modulus property with low odour and excellent working characteristics. DINITROL 501 FC-HM is a high elasticity, solvent and PVC free, OEM approved adhesive with excellent ageing and weather resistance characteristics. (1 x 310ml cartridge supplied or 12 if the full box is purchased)
  • Wax corrosion preventative coating on vehicles such as trucks and buses

    DINITROL High Performance Wax is a beige transparent, low viscous wax for application and corrosion preventative coating on vehicles such as trucks and buses but also for other objects where corrosion is a problem. The product is water repellent and high penetrating. Due to its waxy appearance, it also shows self-healing properties. After drying, the film formed is resistant to temperature up to 180 degC and this makes the product suitable also for applications in for example engine compartments. After drying the product does not show any odour problems when heated. (1 x 500ml aerosol can supplied or 12 if the full box is purchased)
  • Brown coloured vehicle under-body chassis coating rust proofing treatment

    DINITROL 4942 is a brown coloured under-body product for the treatment of vehicles during production, at import plants and in the after-market. The underseal chassis rust protection coating is also ideal for treating passenger cars, older classic cars, 4x4 off road vehicles like Land Rover and commercial vehicles. When applied to a clean, dry surface, it adheres to both painted surfaces and those coated with a layer of PVC or similar material. Zinc, rubber and plastics are completely unharmed by the product. Can be used with an underbody coating gun and lance extension for easy application. (1 x 1 Litre can supplied or 12 if the full box is purchased)