DINITROL 3642 W

From: £755.28

Designed for cavities & clean open dry surfaces

The product is designed for application in cavities as well as on clean, dry open surfaces, mostly on new cars, trucks and buses. The product is particularly clean to use at import plants as well as in the aftermarket. The thixotropic nature of the product ensures an evenly applied film in the required.

(Image shown for illustrative purposes only. Available sizes: 60 Litre Drum or 208 Litre Barrel. 1 x item of the specified size supplied – you can increase the order quantity on the cart page if required)

PLEASE NOTE: Delivery for this product usually takes around 2 to 4 weeks. If you require the items urgently please contact DINITROL Customer Services before placing the order.

Need assistance selecting the correct product? We can help

Description

Available product sizes:

  • 1 Litre Can
  • 60 Litre Drum
  • 208 Litre Barrel

Characteristics:

  • Light Brown
  • High thixotropy
  • Drip resistant also at elevated temperatures
  • Clean on line application
  • Wide film weight range
  • Long term storage or permanent

Applications:
DINITROL 3642 W is designed for application in cavities as well as on clean, dry open surfaces, mostly on new cars, trucks and buses. The product is particularly clean to use at import plants as well as in the aftermarket. The thixotropic nature of the product ensures an evenly applied film in the required thickness and strength.

Method of use:
DINITROL 3642 W is applied by spraying with manual or semi-automatic application equipment, and is suitable for either airmix or airless spraying. Recommended application temperature is between 20° − 26°C. For temperature below 20°C material is thicker, for temperature above 26°C material is thinner.

  • Colour: brown
  • Type of film: waxy
  • Density at 23°C: 850 kg/m³
  • Viscosity at 23°C: 220 mPas
  • Dry matter content: 50 % by weight
  • Flash point: 40°C
  • Aromatic content in solvent: < 0,5 %
  • Recommended film thickness wet: 120 µm
  • Recommended layer thickness: 50 µm
  • Drying time: 3 hrs
  • Low temperature adhesion: – 30°C
  • Removability: White Spirit
  • Heat resistance: > 100°C
  • Salt spray test: > 600 at 100 µm
  • > 1000 at 150 µm

Technical data sheet DINITROL products, rust treatments, corrosion protection, cavity waxes, vehicle body repair fillers, rust convertors classic cars, cars, land rover, commercial vehicles HGV

Additional Information

Reviews

There are no reviews yet.

Be the first to review “DINITROL 3642 W”