DINITROL 4015 – 400ml Aerosol

Call for Price

Water displacing corrosion inhibiting compound spray

Super penetrating water displacing corrosion inhibiting compound, leaving a tack – free, brown transparent, firm film. For protection of all, commonly used metals and alloys. Extremely good performance on light metals. DINITROL 4015 can be used in many situations, offering extremely good corrosion prevention at very low film weight. The viscosity is adjusted to allow very easy and safe application also in difficult to reach-areas of the construction. Since DINITROL 4015 produces a firm film, movable parts should be masked before treatment, unless sufficient control of the spray is possible.

(1 x 400ml aerosol can supplied or 12 if the full box is purchased)

PLEASE NOTE: Delivery for this product usually takes around 2 to 4 weeks. If you require the items urgently please contact DINITROL Customer Services before placing the order.

Need assistance selecting the correct product? We can help

Description

Available product sizes:

  • 400ml Aerosol Can

Characteristics:

  • Brown / Red transparent
  • Forming a hard, tack-free film.
  • Extremely high corrosion resistance at low film weight
  • Suitable for steel as well as white metals

Applications:
Super penetrating water displacing corrosion inhibiting compound, leaving a tack – free, brown transparent, firm film. For protection of all, commonly used metals and alloys. Extremely good performance on light metals.

DINITROL 4015 Spray can be used in many situations, offering extremely good corrosion prevention at very low film weight. The viscosity is adjusted to allow very easy and safe application also in difficult to reach-areas of the construction.

Since DINITROL 4015 Spray forms a firm film, movable parts should be masked before treatment, unless sufficient control of the spray is possible.

Method of use:
DINITROL 4015 Spray is best applied when spraying from a distance of 20 − 40 cm onto open surfaces. In cavities the application is best done by using a suitable extension hose, attached to the spray button. Solvent such as aliphatic hydrocarbon can easily remove the film. For the assembly or control of the parts treated with DINITROL 4015 Spray, it is not necessary to remove the film.

Technical properties:

  • Colour: transparent brown / red
  • Type of film: tack free
  • Density at 23°C: 755 kg/m³
  • Dry matter content: 34% by weight
  • Flash point: < -20°C
  • Rec. film thickness: 15 μm
  • Drying time: 60 min tack-free
  • Penetration: > 80 mm
  • Salt Spray Resistance: > 1500 h at 15 microns DFT or Al

Technical data sheet DINITROL products, rust treatments, corrosion protection, cavity waxes, vehicle body repair fillers, rust convertors classic cars, cars, land rover, commercial vehicles HGV

Additional Information

Reviews

There are no reviews yet.

Be the first to review “DINITROL 4015 – 400ml Aerosol”