DINITROL 443 ZINC – 400ml Aerosol

From: £12.54

Long-term corrosion protection paint for all metals

DINITROL 443 Zinc Paint is a quick-drying, long-term corrosion protection product for all metals. In accordance with DIN 50976, the metal combination of Zinc Paint is made up of 95% pure zinc and 5% dry film synthetic resin, offering double long-term protection. The zinc provides the metal surface with cathodic rust protection and the resistant synthetic resin film offers optimal protection. The zinc spray ensures sparing dosage. Brief spraying is enough to achieve a protection film of 20 _ 30 my.

(1 x 400ml aerosol can supplied or 12 if the full box is purchased)

Need assistance selecting the correct product? We can help

Description

Available product sizes:

  • 400ml Aerosol Spray

Characteristics:
The zinc spray ensures sparing dosage. Brief spraying is enough to achieve a protection film of 20 − 30 my.

Application:
In all bodywork tasks to improve damaged zinc layers, as a conductive intermediate layer for spot welding, as an undercoat for water and weather-susceptible systems, to cover drilled areas and welds. General corrosion protection for metal surfaces.

Method of Use:
Store the spray can at room temperature (16 − 20°C) before use and shake well (1 − 2 minutes)
until the mixing ball can be heard. The surface to be treated must be clean and free from oil and
grease. Spray in a cross coat at a distance of 25 − 30 cm. In order to prevent any blockages,
hold the can downwards after use and briefly spray pure gas. Suitable for varnishing with synthetic
resin lacquers:

  • Zinc Spray can be sprayed with synthetic resin lacquers after approx. 20 − 30 minutes.
    If the synthetic resin lacquer is to be applied with a brush, wait 1 hour before proceeding.

Overcoat lacquering with aggressive lacquers:

  • Zinc Spray can be treated with nitrocellulose, chloride rubber or other aggressive lacquers
    after approx. 1 hour. These lacquers are applied in fine coats.
  • If the lacquers are to be applied with a brush, please wait 24 hours before proceeding.
  • Synthetic resin thinner can be used as a cleaning agent.
  • Colour: grey
  • Base: Epoxy ester
  • Density: 1.12 g/ml
  • Flash point < – 20°C
  • Flash point agent: 27°C
  • Drying time: Touch dry at 20°C: 5 − 7 minutes / 30 µ
  • Zinc content in dry film: ~ 90%
  • Propellant: Propane/butane
  • Yield: ~ 250 g/m² 30 µ dry film
  • Storage: cool and dry
  • Storage time: 24 months

Technical data sheet DINITROL products, rust treatments, corrosion protection, cavity waxes, vehicle body repair fillers, rust convertors classic cars, cars, land rover, commercial vehicles HGV

Additional Information

Reviews

There are no reviews yet.

Be the first to review “DINITROL 443 ZINC – 400ml Aerosol”