DINITROL 448 PYRMOHYD – 1 Litre Canister

From: £19.60

Water-soluble stone chipping and underbody protection

Pyrmohyd is a black coloured water-soluble stone chipping and underbody protection product with a dispersion base and corrosion protection pigments. This stone chipping protection is highly elastic, adheres well and is extremely effective against stone chippings. It is easy to coat with synthetic resin lacquers and 2-c acrylic lacquers, in addition to aqueous base lacquers. Pyrmohyd is not flammable. It contains no carcinogenic substances, does not require any special safety measures during application, and is exempt from labelling requirements in accordance with the regulation on dan-gerous substances at work. (1 x 1 Litre can supplied or 12 if the full box is purchased)

PLEASE NOTE: Delivery for this product usually takes around 2 to 4 weeks. If you require the items urgently please contact DINITROL Customer Services before placing the order.

Need assistance selecting the correct product? We can help

Description

Available product sizes:

  • 1 Litre can

Characteristics:
Pyrmohyd is a water-soluble stone chipping and underbody protection product with a dispersion base and corrosion protection pigments. This stone chipping protection is highly elastic, adheres well and is extremely effective against stone chippings. It is easy to coat with synthetic resin lacquers and 2-c acrylic lacquers, in addition to aqueous base lacquers. Pyrmohyd is not flammable. It contains no carcinogenic substances, does not require any special safety measures during application, and is exempt from labelling requirements in accordance with the regulation on dangerous substances at work.

Application:
As stone chipping protection on front and rear vehicle areas, door sills and entrances. As an anti-drone agent on flat vehicle parts and as repair material to re-touch original stone chipping protective films.

Method of Use:
The material can be applied to uncoated steel, although better results are yielded with primed steel or intact old paint. The surfaces must be free from wax and grease, and be clean and dry.

Rust and loose underbody protection must be removed carefully in order to prevent poor adhesion. Using the underbody suction gun, apply the undiluted product in a cross coat with 4 − 6 bar for structure applications. The higher the pressure, the finer the structure. To achieve a smooth surface, the product can be diluted with max. 15% water. Diluted material can also be applied using a cup gun. For large surfaces, the product can be applied with a drum pump (Airmix). A minimum temperature of + 6°C is required for good film formation. Application is not possible in frosty condition. Any material which is not completely dry must be protected from frost.

Cleaning:
Freshly applied product can be removed from paints and lacquers with water. Wash all work tools immediately with water. Fresh, dried material can be removed with NC or synthetic resin thinner. Completely dry material can no longer be dissolved and can only be removed mechanically.

Technical data sheet DINITROL products, rust treatments, corrosion protection, cavity waxes, vehicle body repair fillers, rust convertors classic cars, cars, land rover, commercial vehicles HGV

Additional Information

Reviews

There are no reviews yet.

Be the first to review “DINITROL 448 PYRMOHYD – 1 Litre Canister”