DINITROL 6030 Alusoft – 2000g Tin

From: £24.69

(1 customer review)

Aluminium body filler for the repair of dents in vehicle bodywork & steel constructions

Aluminium Putty is a universally applicable 2-c filler putty with a polyester basis. The putty is especially compact and pore-free. Aluminium putty is suitable for the repair of dents in vehicle bodywork, steel constructions, to strip machine casing and to renovate cement, brickwork, etc. Dents with up to 15 mm depth can be levelled out on vertical surfaces. Given its high aluminium content, excellent corrosion protection is achieved. (1 x 2000g can supplied or 6 if the full box is purchased)

Need assistance selecting the correct product? We can help
SKU: 1301600/S Categories: , , ,

Description

Available product sizes:

  • 2000g Tin

Characteristics:
Aluminium Putty is a universally applicable 2-c filler putty with a polyester basis. The putty is especially compact and pore-free.

Applications:
Aluminium putty is suitable for the repair of dents in vehicle bodywork, steel constructions, to strip machine casing and to renovate cement, brickwork, etc. Dents with up to 15 mm depth can be levelled out on vertical surfaces. Given its high aluminium content, excellent corrosion protection is achieved. Sanding dust when dry grinding is removed quicker than with standard putties.

Pre-treatment:

Thermoplastic paintwork: – Sand and buff undercoat and clean well i.e. with silicone remover. The substrate must be dry and in good condition, free from grease, mill scale and rust.

2-c lacquers: – Matt burnish and remove dust and grease.
Galvanised zinc-coated sheet steel: – Clean with thinner or ethyl acetate.
Sendzimer galvanised or hot-dipped sheets: – Clean with NC thinner or silicone-remover.
Aluminium substrates: – Lightly file (given the various aluminium alloys, an adhesion test should always be carried out beforehand).

Method of Use:

  • The surface must be free from oil, dust, grease, loose lacquer, paint residues and rust.
  • Filing the substrate with sandpaper will increase adhesion.
  • Mix the required amount of putty with 2 − 3% hardening paste and apply immediately.
  • Working time (pot life) approx. 5 minutes. Depending on the temperature and amount of hardener, the putty can be filed in 15 − 25 mins

Technical data sheet DINITROL products, rust treatments, corrosion protection, cavity waxes, vehicle body repair fillers, rust convertors classic cars, cars, land rover, commercial vehicles HGV

Additional Information

1 review for DINITROL 6030 Alusoft – 2000g Tin

  1. clivehanson

    Dinitrol 6030 Filler is an amazing product. Used it to join two parts back together on an inner wheel arch guard on my car after it was damaged. The usual route would be to buy a complete new or used one. The broken off parts was 10cm long. This wheel arch guard is made of similar hard, durable plastic, similar to that of my fuel tank. After the repair, and 24 hours later, I kicked it and dropped it to test how well it would hold. I have now discovered that this product is extremely strong with immense grab and can be used as epoxy glue (he says with a smiling emoji face).
    Works extremely well to deter rust from returning on the quarter panel and driver door when I applied it more than 6 months ago along with Dinitrol RC900. Sanding afterwards was incredibly easy. So don’t go too crazy with a very rough sandpaper or sanding disc.

Add a review