Our website use cookies. By continuing, we assume your permission to deploy cookies as detailed in our Privacy Policy.

We are currently experiencing some intermittent issues with our payment gateway flagging alleged fraudulent transactions. If you have any problems during checkout please contact us directly on 01423 358 000

Official DINITROL® UK Website. Produced in Germany by DINOL for over 40 years.

Treatment Centre

UK Delivery Only. Free On Orders Over £100

Genuine Product Guarantee Protection

Product - Dinitrol 3850 Clearance | Dinitrol Direct


Dinitrol 3850 Clearance

DINITROL 3850 is used in industrial plants and large workshops where
a high mass flow rate has to be managed. The product offers long-term
protection and good abrasion resistance. The material can be used in
construction, revision, maintenance and repair.

Use by - 13/07/2024 Sold at 35% Discount


Low Stock

Product description:

DINITROL 3850 is a corrosion preventive fluid, designed for long-term protection against corrosion and, due to its residual hard film affords some protection against mechanical wear. DINITROL 3850 contains environmentally acceptable low aromatic solvents, which once evaporated leaves a thick, brown waxy film. DINITROL 3850 is primarily designed for cavity protection but may also be used for storage, transport and underbody protection.

DINITROL 3850 can be applied using manual and semi-automatic application equipment to a clean dry substrate and is suitable for either airmix or airless spraying. Application temperature for product and object is recommended to be 15 – 30°C.
Stir before use!

Pre-treatment substrates
Surfaces to be treated shall be clean and dry. Loose corrosion shall be removed and if possible the corroded surfaces shall be thoroughly cleaned with a wire brush.

DINITROL 3850 is normally not intended to be over-coated.

The product shall be stored at 10-30°C. When the product is stored cool and dry, it will have a shelf life of at least 2 years when stored in unopened original packages.