DINITROL HIGH PERFORMANCE WAX – 500ml Aerosol

Description

Available product sizes:

• 500ml Aerosol can
• 1 Litre can
• 60 Litre Drum

Characteristics:

• Beige Transparent
• Waxy film
• Cavity and general applications
• High temperature resistance
• Water displacing
• Good corrosion resistance
• Good penetration
• Low odour
• No dripping, one hour after application

Applications:
DINITROL High Performance Wax is a brown, low viscous wax for application and corrosion preventative coating on vehicles such as trucks and busses but also for other objects where corrosion is a problem. The product is water repellent and high penetrating. Due to its waxy appearance, it also shows self-healing properties. After drying, the film formed is resistant to temperature up to 180°C and this makes the product suitable also for applications in for example engine compartments. After drying the product does not show any odour problems when heated. DINITROL High Performance Wax is used for cavities in doors, engins hoods, members, re-inforcements etc. in all types of vehicles, machines and other equipment. The product is also highly suitable for applications in the following situations:

• Car manufacturing
• Bus manufacturing
• Trailer manufacturing
• Work shops
• Body shops
• Metal working industries
• Ship yards

Method of use:
Shake before use or stir the product thoroughly. The surfaces to be treated must be clean, dry, rust-, dust- and grease free. DINITROL High Performance Wax can be applied with light airless equipment with special extension tubes with nozzles or by means of an airline fed bun or pressure pot gun with an air-pressure of 3-6 bar. If necessary the product also can be dipped, rolled or brushed. Depending on the application the product can be thinned with a solvent. The product can be sprayed haze free and does not drip. Contaminated surfaces and filthy equipment can be simply cleaned in “fresh” condition with solvents.