DINITROL® Penetrant LT – 500ml Aerosol

Description

Available product sizes:

• 500ml Aerosol
• 1 Litre Can
• 60 Litre Drum
• 208 Litre Barrel

Characteristics:

• Petroleum resin re-inforced film
• Improved abrasion resistance
• Cavity and open surface applications
• Colour: transparent beige
• Type of film: waxy
• Density at 23°C: 860 kg/m³
• Viscosity at 23°C, DIN 4: 18 s
• Dry matter content: 52% by weight
• Flash point: 40°C
• Aromatic content in solvent: < 1%
• Recommended film thickness wet: 150 µm
• Recommended layer thickness: 60 µm
• Drying time: 2 h
• Low temperature adhesion: – 40°C
• Effect on car paint: none
• Removability: White Spirit
• Heat resistance: > 90°C
• Salt spray test: 1000 h
• Penetration 50 µm gap: > 30 mm

Method of use:
DINITROL PENETRANT LT is applied by spraying with manual or semi-automatic application equipment, and is suitable for either air-mix or airless spraying. Application temperature should be between 15 and 30°C.

Applications:
DINITROL PENETRANT LT is designed for application on open surfaces as well as in cavities, such as doors and other parts of cars, trucks and buses. DINITROL PENETRANT LT is also designed for use on spare parts etc, which are stored for long periods or transported under very corrosive weather conditions