Product - DINITROL 444 - Zinc Prime Spray | Dinitrol Direct

Product description:

DINITROL 444 Zincprime Spray light is a quick-drying corrosion protection product with long-term effectiveness for all metals. The material combination of metallic zinc and aluminium pigments makes this product particularly user-friendly, given that in contrast to pure zinc dust paints, it is adapted optically to zinc-plated surfaces. DINITROL 444 Zincprime Spray light ensures low consumption. Light spraying is enough to achieve a protection film of 20 – 30 microns.

Application
DINITROL 444 can be sprayed with synthetic resin lacquers after approx. 20 – 30 minutes. If the synthetic resin lacquer is to be applied with a brush, wait 1 hour before proceeding. DINITROL 444 Zinc Paint Spray light can be treated with nitrocellulose, chloride rubber or other aggressive lacquers after approx 1 hour. These lacquers are applied in light coats. If the lacquers are to be applied with a brush, please wait 24 hours before proceeding. Synthetic resin thinner can be used as a cleaning agent.

Pre-Treatment Substrates
Substrate shall be dry, clean and free from corrosion.

Over-Coating
DINITROL 444 can be over applied with laquers and corrosion preventatives.
 

Technical Data

• Colour Aluminium
• Base Zinc / epoxyester
• Density 0.84 g/cm³
• Flash point < - 20°C
• Heat-resistant up to approx. 200°C
• Consumption g/m³ approx. 150
• Zinc content in dry film > 30%
• Propellant Propane/butane
• Total metal content in dry film approx. 60%
• Binding material in dry film > 30%
• Storage time 24 months (between 15°C and 25°C)
• Available in 400 ml spray can

For all relevant safety advices please read the material safety data sheet.