Our website use cookies. By continuing, we assume your permission to deploy cookies as detailed in our Privacy Policy.

We are currently experiencing some intermittent issues with our payment gateway flagging alleged fraudulent transactions. If you have any problems during checkout please contact us directly on 01423 358 000

Official DINITROL® UK Website. Produced in Germany by DINOL for over 40 years.

Treatment Centre

UK Delivery Only. Free On Orders Over £100

Genuine Product Guarantee Protection

Product - DINITROL Rustproofing Kit Small - For Rust Free/New Cars | Dinitrol Direct

Back

DINITROL Rustproofing Kit Small - For Rust Free/New Cars

This DINITROL® Rust free Car Rustproofing kit is ideal for new passenger cars where there are no signs of corrosion, which are driven in normal circumstances and roads (not off road). 

1 Litre Schultz Cans Kit Contains:-

  • 4 x DINITROL® 1000 Cavity wax 1 Litre Cans
  • 5 x DINITROL® 4941/Car black underbody wax 1 Litre Cans
  • 25 x DINITROL® Plastic Plugs
  • 1 x DINITROL® HS Spray Tool

500ml Aerosol Kit Contains:-

  • 10 x DINITROL® 1000 Cavity wax- 500ml Aerosols
  • 14 x DINITROL® 4941 Black underbody wax- 500ml Aerosols
  • 2 x DINITROL® Aerosol Extension Hose Nozzle Attachment
  • 25 x DINITROL® Plastic Plugs
  • 1 x DINITROL® Compatible Application Trigger Aerosol Attachment
Options

£191.99

Good Stock
SKU:

Product description:

DINITROL® 1000 Spray is a transparent high penetration Polyethylene base cavity wax and is designed for application in closed cavities, doors and other parts. The product provides excellent low temperature properties and is highly water repellent.

DINITROL® CAR/4941 Spray is a vehicle underbody corrosion protection treatment. When applied to a clean, dry surface, it adheres to both painted surfaces and those coated with a layer of PVC or similar material. Zinc, rubber and plastics are completely unharmed by the product.

Health & safety information

Please note before applying the products we strongly recommend that suitable PPE items should be worn during application such as Goggles, Mask, Gloves and Overalls.

Step by step product application guide:

Step 1 – Steam clean the vehicle and allow to dry.
Once dry mask up any areas that you do not want to spray such as exhausts, brakes, electrics or radiator. Wear suitable protective clothing and place plastic floor covering under the vehicle to protect the surface from product drips. You may also require a wire brush to remove any loose material to find the solid base metal.

Step 2 – Spray cavity wax into all box sections and doors.
Using an injection pipe or extension nozzle start to inject the product into internal bodywork and chassis cavities. Please note injection pipes or lances are for cavity wax applications only and not for applying vehicle underbody coatings. Slowly retract through the pillar or box sections whilst applying the product, listening for the spray.

Step 3 – Also apply a thin coat of the cavity wax to the underside of the vehicle.
With the vehicle now raised on suitable ramps you can inject the cavity wax into all the underbody cavities. Before starting the underbody coating treatment apply a thin mist coat of DINITROL® 1000 to the underside of the vehicle. DINITROL® 1000 revitalises any existing or previously applied coatings and helps with the adhesion of the underbody coating whilst retracting into existing corrosion. The DINITROL® 1000 cavity wax coating also contains rust inhibitors and you should allow around 1-2 hours for the product to dry before going on to the next step.

Step 4 – Apply the underbody coating over the thin coat of cavity wax.
After the DINITROL® 1000 has cured you can now start applying the underbody coating. You must apply the coating in even layers by building up the thickness. To obtain the optimum protection a typical thickness of 700 microns wet should be applied this will dry to around 500 microns. The underbody coating combats the highly corrosive effects of road salt and abrasion.

If your product is solvent or water based you must ensure air flow around the vehicle to allow the solvents to evaporate (not as long for water based products), the thicker the application the longer it takes to dry. The applied coating should be touch dry within 6-12 hours approximately. Also to check the coating is dry you can press your thumb onto the wax, it should leave a print in the wax but not come off onto your thumb. Underbody wax shows self-healing properties and skins over when dry but remains soft underneath allowing it to re-seal. It adheres to both painted surfaces and those with a layer of PVC or similar material, it will not harm rubber or plastics.

Step 5 – To clean excess or overspray
To clean equipment use an auto cleaner.

Step 6 – For engine compartments you can use DINITROL® Corroheat 4010 clear wax.
This product is specifically design for engine compartments and will withstand temperatures up to 200°C. Once dry the product creates a hard transparent film that is resistant to both alkaline and acids.

Step 7 – Retreat the cavity wax every 5 years
Also remember to inspect the underbody annually and touch the coating where necessary to check the surface in more detail.

IMPORTANT: Please note DINITROL® Corroheat 4010 and auto cleaner are not included in this kit and must be purchased separately.

PLEASE NOTE: There will be a smell inside of the vehicle initially from the products and possibly a small amount of smoke from around the exhaust area, these are only temporary and will dissipate over a couple of days.

authorised seller Genuine DINITROL products UK dinitrol direct uk import hub mpex direct official authorised stockist rustproofing chassis coatings corrosion protection vehicles cars